Installation - Suzuki AN400 Service Manual

FOOT BOARD
• Remove the frame cover. (!7-18)
• Remove the bolts and screws.
• Remove the left foot board 1.
• Remove the bolts and screws.
• Remove the right foot board 2.

INSTALLATION

• Install the exterior parts in the revers order of removal.
• Pay attention to the following points:
PILLION RIDER HANDLE
• Apply THREAD LOCK to the pillion rider handle (left, right)
bolts.
" 99000-32050: THREAD LOCK "1342"
• Tighten the pillion rider handle bolts to the specified torque.
# Pillion rider handle bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
CHASSIS 7-19