Suzuki AN400 Service Manual page 34

BRAKE PAD WEAR
• The extent of brake pad wear can be checked by observing
the grooved limit A on the pad. When the wear exceeds the
grooved limit, replace the pads with new ones.
"
Replace the brake pad as a set, otherwise braking per-
formance will be adversely affected.
• Remove the rear brake caliper cover 1.
BRAKE PAD REPLACEMENT
• Front brake pad. (!7-26)
• Rear brake pad. (!7-52)
FRONT BRAKE FLUID REPLACEMENT
• Place the motorcycle on a level surface and keep the handle-
bar straight.
• Remove the master cylinder reservoir cap and diaphragm.
• Suck up the old brake fluid as much as possible.
• Fill the reservoir with new brake fluid.
) Specification and classification: DOT4
PERIODIC MAINTENANCE 2-17
Brake disc