Throttle Cable Play - Suzuki AN400 Service Manual

2-12 PERIODIC MAINTENANCE

THROTTLE CABLE PLAY

Inspect initially at 1 000 km (600 miles, 1 months) and
every 6 000 km (4 000 miles, 6 months) thereafter.
Adjust the throttle cable play A with the following three steps.
First step:
• Loosen the lock nut 1 of the throttle returning cable 2 and
turn in the adjuster 3 fully into the threads.
Second step:
• Loosen the lock nut 4 of the throttle pulling cable 5.
• Turn the adjuster 6 in or out until the throttle cable play A
should be 2.0 – 4.0 mm (0.08 – 0.16 in) at the throttle grip.
• Tighten the lock nut 4 while holding the adjuster 6.
Third step:
• While holding the throttle grip at the fully closed position,
slowly turn out the adjuster 3 of the throttle returning cable 2
to feel resistance.
• Tighten the lock nut 1 while holding the adjuster 3.
$ Throttle cable play A: 2.0 – 4.0 mm (0.08 – 0.16 in)
'
After the adjustment is completed, check that handle-
bar movement does not raise the engine idle speed
and that the throttle grip returns smoothly and auto-
matically.