Suzuki AN400 Service Manual page 285

7-74 CHASSIS
• Install the bearings using the special tool.
% 09941-34513: Steering race & swingarm
bearing installer
$
When press-fitting the bearing, the bearing should be
positioned so that its stamped mark side faces the
tool.
• Prior to assembly, apply SUZUKI SUPER GREASE to each
spacer and bearing.
' 99000-25010: SUZUKI SUPER GREASE "A" (Others)
99000-25030: SUZUKI SUPER GREASE "A" (USA)
• Install the rear shock absorber and rear cushion lever.
(!7-73)
• Install the rear suspension on the chassis and tighten with
bolts and nuts referring to the illustration in the previous page.
(!7-73)
NOTE:
Pass the cushion lever mounting bolt after all other bolts have
been inserted.
• Install the rear shock absorber adjuster 1.
• Rear shock absorber adjuster hose routing. (!9-22)
• Tighten the rear shock absorber adjuster bolts 2 to the spec-
ified torque.
# Rear shock absorber adjuster bolt :
SPRING PRE-LOAD ADJUSTMENT
• Turn the adjuster handle, adjust the rear shock absorber
spring pre-load. (!2-21)
10 N·m (1.0 N·m, 7.0 lb-ft)