Suzuki AN400 Service Manual page 107

• Remove the bushing 3 using the special tool.
% 09924-84521: Bearing installer set
NOTE:
To remove the bushing 4, use an appropriate size steel tube 5
such as a spacer.
• Remove the oil seal 6 using the special tool.
% 09913-50121: Oil seal remover
• Remove the bearing 7 using the special tool.
% 09913-70210: Bearing installer set (42 × 47 mm)
• Remove the bearing 8.
% 09921-20240: Bearing remover set (20 mm)
Crankcase
ENGINE 3-61