Suzuki AN400 Service Manual page 257

7-46 CHASSIS
• Press in the lower inner race 1 using the special tool.
% 09925-18011: Bearing installer
• Apply SUZUKI SUPER GREASE to the upper bearing, lower
bearing and outer races.
' 99000-25010: SUZUKI SUPER GREASE "A" (Others)
99000-25030: SUZUKI SUPER GREASE "A" (USA)
• Tighten the steering stem nut 2 to the specified torque using
the special tools.
% 09940-14911: Steering socket wrench
09940-11430: Steering stem nut socket
# Steering stem nut: 30 N·m (3.0 kgf-m, 21.5 lb-ft)
• Turn the steering stem right and left 5-6 times to break-in the
bearing.
• Return the steering stem nut 3 by 1/4 to 1/2 of a turn.
• In this condition, check that the steering stem can turn
smoothly with no rattle and stiffness.
• If there is a rattle or heavy movement, adjust the tightness by
the stem nut.
• Fit the washer with its tab A engaged with the steering stem
groove.