CHASSIS
7-79
VALVE INSPECTION
Inspect the valve after the tire is removed from the rim.Replace
the valve with a new one if the seal A rubber is peeling or has
damage.
NOTE:
If the external appearance of the valve shows no abnormal con-
dition, removing of the valve is not necessary.
If the seal has abnormal deformation, replace the valve with a
new one.
Any dust or rust around the valve hole B must be cleaned off.
Then install the valve C in the rim.
NOTE:
To properly install the valve into the valve hole, apply a special
tire lubricant or neutral soapy liquid to the valve.
$
Be careful not to damage the lip C of valve.