Suzuki AN400 Service Manual page 253

7-42 CHASSIS
• Install the O-ring to the front fork cap bolt and apply fork oil.
, 99000-99044-10G: SUZUKI FORK OIL #10
$
Replace the O-ring with a new one.
• Insert the front fork inner tube top end into the steering stem
all the way until the step of mounting hole has been con-
tacted.
• Tighten the clamp bolts temporarily.
• Install the washer and temporarily tighten the front fork cap
bolt.
• Tighten the front fork clamp bolts 1 to the specified torque.
# Front fork clamp bolt :23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the front fork cap bolt 2 to the specified torque, using
the special tool.
% 09940-30230: Hexagon socket (17 mm)
# Front fork cap bolt: 45 N·m (4.5 kgf-m, 32.5 lb-ft)
• Perform the following inspections after assembly has been
completed.
* Front fork (!2-21)
* Speedometer lead wire routing (!9-20)