Suzuki AN400 Service Manual page 112

3-66 ENGINE
• Clean and degrease the crankcase mating surfaces(both sur-
faces)with a cleaning solvent.
• Fit the dowel pins 1 into the left crankcase.
• Apply SUZUKI BOND to the right crankcase.
, 99000-31110: SUZUKI BOND "1215" (Others)
- 99104-31140: SUZUKI BOND "1207B" (USA)
$
* Coat the sealant evenly without break.
* Application of sealant must be performed within a
short period of time.
* Take extreme care not to let sealant enter into the oil
hole or bearing.
• Assemble the crankcases with in few minutes.
• Fit the gasket washer to the right crankcase bolts A.
$
Replace the copper washer with a new one.
• Fit the gasket washers to the left crankcase bolts B.
$
Replace the copper washers with new ones.
(Others)
(USA)