Starter Motor - Suzuki AN400 Service Manual

3-82 ENGINE
• Install the cylinder head cover.
• Install the seal gasket to the cylinder head cover bolt 1.
• Tighten the cylinder head cover bolts to the specified torque.
# Cylinder head cover bolt: 14 N·m (1.4 kgf-m, 10 lb-ft)
$
Replace the gasket with a new one.
• Install the spark plug. (!2-7)

STARTER MOTOR

• Install the O-ring 1 to the starter motor.
$
Replace the O-ring with a new one.
• Apply SUZUKI SUPER GREASE to the O-ring 1.
" 99000-25010: SUZUKI SUPER GREASE "A" (Others)
99000-25030: SUZUKI SUPER GREASE "A" (USA)