Suzuki AN400 Service Manual page 97

• Remove the bearing retainer 6.
• Remove the bearings 7, 8 using the special tool.
% 09921-20240: Bearing remover set( 7 20 mm)
• Remove the bearing 9 using the special tool.
% 09913-70210: Bearing installer set (32 × 35 mm)
• Remove the magnet 0.
• Clean the magnet with a cleaning solvent.
• Remove the drain plug A, oil level plug B and oil filler plug
C.
( 8 25 mm)
ENGINE 3-51