Fuel Level Gauge Inspection - Suzuki AN400 Service Manual

FUEL LEVEL GAUGE INSPECTION

Measure resistance between the terminals when the float is at
the position instead below.
$ 09900-25008: Multi-circuit tester set
Fuel float position
F:98.4 mm (3.87 in) from
tank mating face
1/2:176.1 mm (6.93 in)
from tank mating face
E:244.7 mm (9.63 in) from
tank mating face
• If the resistance measured is out of the specification, replace
the gauge with a new one.
• Fuel level meter inspection ("8-28)
176.1mm
(6.93in)
E
244.7mm
(9.63in)
Resistance between terminals
Approx. 4 – 10 Ω
Approx. 40 – 50 Ω
Approx. 90 – 100 Ω
F
98.4mm
(3.87in)
1
2
FUEL SYSTEM AND THROTTLE BODY 5-11