Tire; Tire Tread Depth - Suzuki AN400 Service Manual

2-22 PERIODIC MAINTENANCE

TIRE

Inspect initially at 1 000 km (600 miles, 1 months) and
every 6 000 km (4 000 miles, 6 months) thereafter.
TIRE TREAD CONDITION
• Operating the motorcycle with excessively worn tire will
decrease riding stability and consequently invite a dangerous
situation. It is highly recommended to replace a tire when the
remaining depth of tire tread reaches the following specifica-
tion.
% 09900-20805: Tire depth gauge

$ Tire tread depth

Service Limit (FRONT) : 1.6 mm (0.06 in)
(REAR) : 2.0 mm (0.08 in)
TIRE PRESSURE
• If the tire pressure is too high or too low, steering will be
adversely affected and tire wear increased. Therefore, main-
tain the correct tire pressure for good roadability or shorter tire
life will result. Cold inflation tire pressure is as follows.
SOLD RIDING
COLD INFLATION
TIRE PRESSURE
kPa
FRONT 175
REAR 200
"
The standard tire fitted on this motorcycle is 110/90-13
M/C 55P for front and 130/70-13 M/C 63 P for rear. The
use of tires other than those specified may cause
instability. It is highly recommended to use a SUZUKI
Genuine Tire.
TIRE TYPE
BRIDGESTONE (Front: HOOP B03, Rear: HOOP B02)
DUAL RIDING
kgf/cm² psi kPa kgf/cm²
1.75 25 175
2.00 28 280
psi
1.75 25
2.80 40