Rear Brake - Suzuki AN400 Service Manual

REAR BRAKE

Brake hose
! Master cylinder
" Piston/cup set
# Snap ring
$ Boot
% Caliper bracket
& Brake-lock housing
' Brake-lock shaft
Brake-lock adjuster
ITEM N·m
)
28
*
28
+
22
)
* This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use mix
different types of fluid such as silicone-based or petroleum-based.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake
fluid left over from the last servicing or stored for long periods.
* When storing the brake fluid, seal the container completely and keep away from children.
* When replenishing brake fluid, take care not to get dust into fluid.
* When washing brake components, use fresh brake fluid. Never use cleaning solvent.
* A contaminated brake disc or brake pad reduces braking performance. Discard contaminated
pads and clean the disc with high quality brake cleaner or neutral detergent.
$
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials
etc. and will damage then severly.
) Brake-lock arm
* Brake caliper
+ Pad spring
, Brake pad
- Piston
. Piston seal
Dust seal
)
*
Union bolt
+ Caliper mounting bolt
Brake-lock housing bolt
kgf-m Ib-ft
2.8 20.5
2.8 20.5
2.2 16.0
CHASSIS 7-51