Suzuki AN400 Service Manual page 63

• With the crankshaft held immovable, loosen the fixed drive
face nut.
• Remove the washer.
• Remove the fixed drive face 1.
• With the clutch housing held immovable using the special
tool, loosen the clutch housing nut 2.
• Remove the clutch housing 3.
% 09930-40113: Rotor holder
• Remove the drive V-belt 4 and clutch shoe/movable driven
face assembly 5.
• Remove the movable drive face assembly 6 with the spacer
7.
• Remove the driveshaft 8 together with the transmission
cover 9.
ENGINE 3-17