Fuel Pump Relay Inspection; Fuel Pump And Fuel Level Gauge Disassembly - Suzuki AN400 Service Manual

Hide thumbs Also See for AN400:
Table of Contents

Advertisement

FUEL PUMP RELAY INSPECTION

• Fuel pump relay is located behind the front panel.
• Remove the front leg shield.
• Remove the fuel pump relay.
• First, check the insulation between 1 and 2 terminals with
pocket tester. Then apply 12 volts to 3 and 4 terminals, + to
3 and - to 4, and check the continuity between 1 and 2.
• If there is no continuity, replace it with a new one.
FUEL PUMP AND FUEL LEVEL GAUGE DIS-
ASSEMBLY
• Remove the fuel pump assembly. ("5-6)
• Remove the ground lead wire 1 and clamp 2.
• Remove the fuel pump 3.
• Remove the fuel pressure regulator 4.
FUEL SYSTEM AND THROTTLE BODY
5-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

An400 2003

Table of Contents