Fuel Level Meter Inspection - Suzuki AN400 Service Manual

8-28 ELECTRICAL SYSTEM

FUEL LEVEL METER INSPECTION

• Remove the side leg shield. (!7-15)
• Disconnect the fuel pump coupler 1.
• Check that the fuel level meter moves properly when the
resistor is connected between the fuel pump coupler termi-
nals.
• If the indication excessively deviators from the standard
value, replace the meter with a new one.
NOTE:
* Prior to this inspection, check that the fuel gauge is functioning
properly.
* When reading the meter indication, wait at least for 20 sec-
onds after the resistor has been connected.
Resistor
Approx. 95 Ω
Approx. 51 Ω
Approx. 10 Ω
FUEL LEVELGAUGE INSPECTION
For the inspection procedure. (!5-11)
Meter indication
1
2
3