Suzuki AN400 Service Manual page 83

AUTOMATIC DECOMP
• Check that decomp cam 1 moves smoothly and pin 2
rotates together. If any abnormal condition are found, replace
the camshaft.
CAM CHAIN GUIDE INSPECTION
• Check the cam chain guide for wear and damage.
• If it is found to be damaged, replace it with a new one.
CAM CHAIN TENSIONER INSPECTION
• Check the contacting surface 1 of the cam chain tensioner.
• If it is worn or damaged, replace it with a new one.
CAM CHAIN TENSIONER REMOUNTING
• Install the cam chain tensioner 1 in the cylinder head.
• Install the gasket washer 2 to the bolt 3, and then tighten it
to the specified torque.
# Cam chain tensioner bolt: 13 N·m (1.3 kgf-m, 9.5 lb-ft)
ENGINE 3-37