Suzuki AN400 Service Manual page 380

• Check that air flows through the air inlet port to the air outlet
port.
• If air does not flow out, replace the PAIR control solenoid
valve with a new one.
• Connect the 12 V battery to the PAIR control solenoid valve
terminals and check the air flow.
• If air does not flow out, the solenoid valve is in normal condi-
tion.
• Check the resistance between the terminals of the PAIR con-
trol solenoid valve.
" Resistance: 20 – 24 Ω Ω Ω Ω (at 20 °C/68 °F)
# 09900-25008: Multi circuit tester set
$ Tester knob indication: Resistance (Ω Ω Ω Ω )
If the resistance is not within the standard range, replace the
PAIR control solenoid valve with a new one.
• Installation is in the reverse order of removal.
• Connect the PAIR control solenoid valve coupler securely.
EMISSION CONTROL INFORMATION
Battery
10-7