BEARING INSPECTION
Wash the bearing with a cleaning solvent and lubricate it with
motor oil before inspection. Rotate the inner race and check to
see that it turns smoothly. If it does not turn quietly and
smoothly, or if there are signs of any abnormalities, the bearing
is defective and must be replaced with a new one.
RIGHT CRANKCASE
BEARING REMOVAL
• Remove the crankshaft right bearing with the special tool.
$ 09913-70210: Bearing installer set (42 mm)
#
Replace the removed bearing with a new one.
BEARING INSTALL
• Install the bearing with the special tool.
$ 09913-70210: Bearing installer set (62 mm)
ENGINE MOUNTING BUSHING
Inspect each engine mounting bushing 1 for damage.
If any damage is found, replace the engine mounting bushing
with a new one.
• Press out the engine mounting bushings in a vise using two
steel tubes of the appropriate size, as shown.
#
Replace the removed bushing with a new one.
http://mototh.com
Play
Crankcase
ENGINE
3-51
Play