"
To prevent oil or water from entering into the motor
inside, the O-rings must be replaced with new ones.
• Apply SUZUKI SUPER GREASE to the O-ring.
- 99000-25010: SUZUKI SUPER GREASE "A" (Others)
99000-25030: SUZUKI SUPER GREASE "A" (USA)
• Fit the washer 1 to the housing end with the tab aligned with
the housing end cutaway, position the shim 2 and assemble
the starter motor.
• Align the mark A on the housing with the line B on the hous-
ing end.
• Fit the O-rings to the starter motor housing bolts and tighten
the bolts.
/ Starter motor housing bolt: 3.7 N·m (0.37 kgf-m, 2.7 lb-ft)
• Apply SUZUKI SUPER GREASE to the O-ring 3.
- 99000-25010: SUZUKI SUPER GREASE "A" (Others)
99000-25030: SUZUKI SUPER GREASE "A" (USA)
• Install the starter motor.
/ Starter motor mounting bolt: 7 N·m (0.7 Kgf-m, 5.0 lb-ft)
ELECTRICAL SYSTEM
8-17