Inspection; Reassembly And Remounting - Suzuki AN400 Service Manual

• Remove the lower inner race using a chisel like, plain head
steel rod.
$
* Unless corrosion, damage or other abnormal condi-
tion is found, the bearing race need not be replaced.
* Once the lower inner race has been removed,
replace it with a new one.
• Drive out the steering stem bearing outer races using the spe-
cial tools 1 and 2.
% 09941-54911: 1 Bearing outer race remover
09941-74910: 2 Steering bearing installer

INSPECTION

• Inspect the steering stem and steering stem head for any
damage.
• Inspect the bearing and race for corrosion, nick or other dam-
age.

REASSEMBLY AND REMOUNTING

• Reassemble and remount the steering in the reverse order of
removal and disassembly.
• Pay attention to the following points:
• Press in the upper and lower outer race using the special tool.
% 09941-34513: Steering race installer
CHASSIS 7-45