Inspection; Remounting - Suzuki AN400 Service Manual

• Remove the muffler bracket 2.
• Remove the rear wheel nuts 3 and remove the wheel 4.

INSPECTION

TIRE
• For inspection of tire. (!7-78)
REAR WHEEL
• Turn the rear wheel with the brake caliper removed and mea-
sure runout using a dial gauge.
• If the runout measured exceeds the service limit, overhaul the
rear axle and check for the cause. (!3-18, 71)
& Rear wheel runout (Radial and Axial):
Service Limit: 2.0 mm (0.08 in)

REMOUNTING

• Remount the rear wheel in the reverse order of removal.
• Pay attention to the following points:
• Install the rear wheel and tighten the rear wheel nuts 1 to the
specified torque.
# Rear wheel nut: 50 N·m (5.0 kgf-m, 36.0 lb-ft)
CHASSIS 7-49