Suzuki AN400 Service Manual page 267

7-56 CHASSIS
• Apply SUZUKI SILICONE GREASE to the brake-lock shaft 3
and O-ring 4.
- 99000-25100: SUZUKI SILICONE GREASE
• Install the brake-lock shaft 5 so as the punch mark A may
position between both notch B of housing when tightening
(turning counterclockwise) the brake-lock shaft.
• Align the punch mark C on the brake-lock shaft with the
punch mark D on the brake-lock arm.
• Apply SUZUKI SILICONE GREASE to the tip and thread of
brake-lock adjuster, assemble the lock-nut and spring tempo-
rarily.
- 99000-25100: SUZUKI SILICONE GREASE