Brake-Lock; Inspection; Adjustment - Suzuki AN400 Service Manual

2-28 PERIODIC MAINTENANCE

BRAKE-LOCK

INSPECTION

• Inspect that the wheel is locked up when pulling the brake
lock lever 2 to 4 notches and moving the motorcycle forward
to make sure that the brake-lock acts enough.

ADJUSTMENT

• Pull the brake-lock lever by one step (one notch).
NOTE:
The brake-lock lever have 8 steps (8 notchs) when pulling in full.
• Remove the rear brake caliper cover 1.
• With the lock nut 2 loosening, adjust the adjuster bolt 3 in
until the brake pad comes in contact with brake disc.
• Tighten the lock nut 2.