5-20
FUEL SYSTEM AND THROTTLE BODY
• With the throttle valve fully closed, install the TP sensor to the
original setting position.
% TP sensor mounting screw: 3.5 N·m (0.35 kgf-m, 2.5 lb-ft)
• Install the IAC valve.
#
Replace the O-ring with a new one.
• Apply thin coat of the engine oil to the new O-ring.
INSTALLATION
• Installation is in the reverse order of removal. Pay attention to
the following points:
• With THREAD LOCK applied to the mounting bolts, install the
PAIR control solenoid valve.
( 99000-32050: THREAD LOCK "1342"
• Insert the protrusions A of air cleaner box into the holes B of
its bracket.
THROTTLE CABLE ADJUSTMENT
• Adjustment can be made by the throttle grip side adjuster.
("2-12)