3-76
ENGINE
• Tighten the water pump bolts to the specified torque.
# Water pump bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
OIL FILTER
• Install the O-ring 1.
$
Replace the O-ring with a new one.
• Install the oil filter 2.
$
Position the oil filter so that the valve A comes out-
side.
• Install the O-ring 3.
• Install the oil filter cap 4.
• Tighten the oil filter cap bolts to the specified torque.
$
Position the triangle mark B of oil filter cap comes up
side.
# Oil filter cap bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
PISTON RING
• Install the piston rings in the order of oil ring, 2nd ring and top
ring.
• To install the oil ring, fit the spacer 1 first and then the side
rails 2.