Suzuki AN400 Service Manual page 55

• Make sure that the thread of axle shaft is clean of any greasy
matter.
• Tighten the rear axle nut to the specified torque.
# Rear axle nut: 120 N·m (12.0 kgf-m, 87.0 lb-ft)
23 N·m
(2.3 kgf-m, 16.5 lb-ft)
NOTE:
Install the muffler cover with its arrow mark A pointing top.
• After the engine has been mounted, install the lead wires,
cables and hoses securely.
• Pour the specified amount of final gear oil. (!2-10)
• Pour the specified amount of engine oil. (!2-9)
• Pour the specified amount of engine coolant. (!2-14)
• Perform the following adjustments:
* Throttle cable. (!2-12)
* Brake-lock. (!2-28)
• Check for leakage of the transmission oil, engine oil and
engine coolant.
30 N·m
(3.0 kgf-m,
21.5 lb-ft)
ENGINE 3-9