Suzuki AN400 Service Manual page 67

• Remove the balancer shaft key 1.
• With the crankshaft held immovable, loosen the balancer
drive gear nut 2.
% 09920-21410: Long socket (46 mm)
• Remove the washer 3 and balancer drive gear 4.
• Remove the pin 5.
• Remove the 6-mm crankcase bolts 6.
• Remove the 8-mm crankcase bolts 7.
$
Loosen the smaller diameter crankcase bolts first and
then thicker ones diagonally and evenly.
ENGINE 3-21