Sensors; Ckp Sensor Inspection; Ckp Sensor Removal And Installation; Iap Sensor Inspection - Suzuki Burgman UH125 Service Manual

SENSORS

CKP SENSOR INSPECTION

The crankshaft position sensor is installed behind the generator
cover. (#4-30)

CKP SENSOR REMOVAL AND INSTALLATION

• Remove the generator cover. (#3-14)
• Install the generator cover in the reverse order of removal.

IAP SENSOR INSPECTION

The intake air pressure sensor is installed on the throttle body.
(#4-33)

IAP SENSOR REMOVAL AND INSTALLATION

• Remove the trunk box. (#8-11)
• Remove the IAP sensor.
• Install the IAP sensor in the reverse order of removal.

TP SENSOR INSPECTION

The throttle position sensor is installed on the throttle body.
(#4-38)

TP SENSOR REMOVAL AND INSTALLATION

• Remove the trunk box. (#8-11)
• Remove the TP sensor. (#5-11)
• Install the TP sensor in the reverse order of removal.

ECT SENSOR INSPECTION

The engine coolant temperature sensor is installed at the cylin-
der head. (#4-43)

ECT SENSOR REMOVAL AND INSTALLATION

• Remove the ECT sensor. (#7-10)
• Install the ECT sensor in the reverse order of removal.
* ECT sensor: 18 N·m (1.8 kgf-m)
FI SYSTEM DIAGNOSIS 4-63