Starter Motor Removal - Suzuki Burgman UH125 Service Manual

9-14 ELECTRICAL SYSTEM
Step 3
1) Measure the starter relay voltage at the starter relay connectors (between Bl/W + and R/W -) when the
starter button is pushed.
Is a voltage OK?
YES Go to Step 4.
• Faulty safety relay.
• Faulty starter button.
• Faulty engine stop switch.
• Faulty side-stand relay.
NO • Faulty ignition switch.
• Faulty front brake switch or rear brake switch.
• Faulty side-stand switch.
• Improper connector contact.
• Open circuit in wire harness.
Step 4
1) Inspect the starter relay. (!9-16)
Is the starter relay OK?
YES Poor starter relay connection.
NO Faulty starter relay.
Engine does not turn though the starter motor runs.
• Faulty starter clutch.

STARTER MOTOR REMOVAL

• Remove the battery - lead wire from the battery.
• Remove the frame covers. (!8-9)
• Remove the starter motor 1.