Rear Brake Caliper Disassembly - Honda MUV700 big red Service Manual

Set the hose Jomt
In/o the stopper
groove.
Install the brake caliper onto th e knuckle with new
mounting bolts, and tighten them.
TORQUE: 108 N·m (11.0 kgf·m , 80 Ibf·ft)
Tighten the slide pin bolts while holding the slide
pin.
TORQUE: 22.5 N·m 12.3 kgf·m. 17 IbUt)
Connect the brake hose to the brake caliper with the
oi l bolt and new seal ing washers, and tighten it.
TORQUE: 34 N'm (3.5 kgf·m, 25 IbUt)
Install the outboard guard with new bolts and
tighten them.
TORQUE: 11 N 'm (1 .1 kgf·m, 8 Ibf.tt)
Fill and bleed the hyd raulic system (page 18-7).
Install the front wheel (page 15·6).
REAR BRAKE CALIPER
OISASSEMBL Y
Remove the rear wheel (page 17-5).
Drain the brake fluid (page 18-6).
Remove the two bolts and cable holder cover.
BRAKE SYSTEM
CALIPER
PIN BOLTS
18-19