Conventional Brake Components
Parking Brake Switch Test
1. Remove the rear console, and disconnect the
connector (A) from the switch (8).
UP
DOWN
B
2. Check for continuity between the switch terminal
and body ground:
• With the brake lever up, there should be
continuity .
• With the brake lever down, there should be no
continuity.
19-10
Brake Fluid Level Switch Test
Check for continuity between the terminals (A) with the
float in the down position and the up position.
• Remove the brake fluid completely from the reservoir.
With the float down, there should be continuity .
• Fill the reservoir with brake fluid to MAX (upper) level
(8). With the float up, there should be no continuity.
B
r==:{
A
•