Assigning A Public Key To An Ssh User; Specifying A Source Ip Address/Interface For The Ssh Server - 3Com WX3000 Series Operation Manual

Follow these steps to import the RSA public key from a public key file:
To do...
Enter system view
Import the RSA public key from
a public key file
The result of the display rsa local-key-pair public command or the public key converted with the
SSHKEY tool contains no information such as the authentication type, so they cannot be directly used
as parameters in the public-key peer command. For the same reason, neither can the result of the
display public-key local rsa public command be used in the rsa peer-public-key command directly.

Assigning a Public Key to an SSH User

This configuration task is unnecessary if the SSH user's authentication mode is password.
For the publickey authentication mode, you must specify the client's public key on the server for
authentication.
Follow these steps to assign a public key for an SSH user:
To do...
Enter system view
Assign a public key to an
SSH user
Both the keywords publickey and rsa-key represent the public key, and have the same
implementation.

Specifying a Source IP Address/Interface for the SSH Server

This configuration task allows you to specify a source IP address or interface for the SSH server, which
is used by clients as the destination.
Use the command...
system-view
rsa peer-public-key keyname
import sshkey filename
Use the command...
system-view
ssh user username assign
{ publickey | rsa-key } keyname
1-11
Remarks
—
Required
Remarks
—
Required
If you issue this command multiple
times, the last command overrides
the previous ones.