Mazda RX-8 Workshop Manual page 3992

< Previous Next >
2011 - RX-8 - Body and Accessories
HEADLIGHT CLEANER ACTUATOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front bumper. (See
3. Remove the headlight cleaner nozzle. (See
HEADLIGHT CLEANER NOZZLE
4. Squeeze the clip tabs and slide the clip in the direction of the arrow.
5. Disconnect headlight cleaner hose from the headlight cleaner actuator.
6. Remove the screw, then remove the headlight cleaner actuator.
7. Install in the reverse order of removal.
< Previous Next >
FRONT BUMPER
INSTALLATION.)
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
HEADLIGHT CLEANER NOZZLE REMOVAL.) (See
Back to Top