Mazda RX-8 Workshop Manual page 3950

< Previous Next >
2011 - RX-8 - Body and Accessories
VANITY MIRROR ILLUMINATION BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver
in the direction shown by the arrow to remove the lens.
3. Remove the vanity mirror illumination bulb.
4. Install in the reverse order of removal.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
Back to Top