Change Stored Settings - Xantrex XDC 10-600 Operating Manual

Operation
Power Supply Operation
The following table demonstrates how to set and save current and voltage settings:
Step # Do This
1
2
3
4
5
6
7
1. (unused) appears with Set 1 if there are no saved settings in the system. Press Enter to save
your setting as Set 1. If (unused) does not appear, then you can overwrite Set 1 with your new
setting or use the numeric keypad or arrow keys to find the next unused set number. You can
also press CE to clear an existing setting and then press ENTER to replace the cleared setting
with your new setting.
Change To change a stored setting, overwrite it with a new setting, or select the setting, press
Stored CE and hold it for a few seconds to clear the setting from memory.
Settings
78
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
VOLTAGE
Turn the Voltage knob or use the
numeric keypad to enter a voltage
setpoint.
ENTER
CURRENT
Turn the Current knob or use the
numeric keypad to enter a current
setpoint.
STORE
ENTER
You Will See
Set #####V
Set #####V
Your voltage setting appears on the
display.
Your voltage setting is saved.
Set #####A
Your current setting appears on the
display.
1
Set 1 (unused)
Set 1
Your voltage and current setting is now
saved as Set 1.
Operating Manual for XDC Series Power Supply