Xantrex XDC 10-600 Operating Manual page 83

Operation
Power Supply Operation
To select a stored user setting:
Step # Do This
1
2
3
1. This prompt appears when there is at least one saved setting in memory. If there are no saved
settings, the display reads None Saved and then automatically returns to User Settings.
To select a factory setting:
Step # Do This
1
2
To select Auto Sequence:
Step # Do This
1
2
3
1. This prompt appears when there is at least one saved programs in memory. If there are no
saved programs, the display reads None Saved and then automatically returns to Auto
Sequence.
For operation of Auto Sequence mode, see "Using Auto Sequencing" on page 97.
80
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Press twice.
RECALL
ENTER Use the numeric keypad
or arrow keys to enter a value
between 1 and 10.
Use the numeric keypad
ENTER
or arrow keys to enter a value
between 1 and 10.
Press 3 times.
RECALL
This restores the setpoints
ENTER
to factory defaults.
RECALL
Press 4 times.
ENTER
Use the numeric keypad
or arrow keys to enter a value
between 1 and 10.
This runs the selected
ENTER
Auto Sequence program.
You Will See
User Setting
1
User Set ##
You Will See
Factory Preset
You Will See
Auto Sequence
1
User Set ##
Operating Manual for XDC Series Power Supply