Xantrex XDC 10-600 Operating Manual page 93

Operation
Power Supply Operation
Setting step advance by trigger:
This procedure continues from step 13 in the "To program a sequence:" table. It
explains how to program the sequence to advance a particular step by waiting for a
certain trigger event. See "Editing Trigger Source of a Sequence" on page 96 for
more information about trigger event.
Step # Do This
1
2
The completion of this procedure will bring you back to step 15 of the "To program
a sequence:" table. Continue programming the current step.
Note The default value for a sequence's repeat time and trigger source is repeat once and
trigger from key. See
Trigger Source of a Sequence" on page 96
values.
90
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
or . Use the scroll
keys to select the Wait for Trig
option.
ENTER
"Editing Repeat Times of a Sequence" on page 95
You Will See
Set Step Time
Wait for Trig
To Next Step
for an explanation of how to edit these
Operating Manual for XDC Series Power Supply
"Editing
and