Xantrex XDC 10-600 Operating Manual page 70

To set the Over-Voltage Protection:
Step # Do This
1
2
3
4
The other protection options follow a similar procedure, but have 2 extra steps:
1. When you press PROT SET / ALARMS, the OVP prompt appears. Press
PROT SET/ ALARMS repeatedly to cycle through the other protection
options.
2. Protection options, other than OVP, prompt you with S/D if trip? N
Use the arrow keys to select Yes or No.
Yes shuts down the power supply if the protection limit is reached.
No issues a warning (a message in the Alarms menu) without shutting down the
supply.
Release 3.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PROT SET
ALARMS
ENTER
Use the Voltage knob, the numeric,
keypad, or the arrow keys to enter a
value. The value must be between
0–103% of the unit's rated voltage.
ENTER
Power Supply Operation
You Will See
OVP SHUTDOWN
OVP SET 0V
OVP SET ####V
This setting is saved and the display
returns to its default operating mode.
Operation
67