Table B.11 Protection Commands; Table B.12 User Lines; Table B.13 Output State - Xantrex XDC 10-600 Operating Manual

Table B.11Protection Commands
SCPI Command
Function
Set Over Temperature [:]SENSe[<channel>]:TEMPerature:PROTection:LATCh
Response
<on-off-state>
Query Over Temperature [:]SENSe[<channel>]:TEMPerature:PROTection:TRIPped?
Protection Tripped
Set AC Fail Response [:]SENSe[<channel>]:VOLTage:AC:PROTection:LATCh
<on-off-state>
Query AC Fail Protection [:]SENSe[<channel>]:VOLTage:AC:PROTection:TRIPped?
Tripped
Table B.12User Lines
SCPI Command
Function
Select polarity of Auxiliary [:]OUTPut[<channel>]:AUXiliary<A|B>:POLarity
Lines
{HIGH|LOW}
Select Source of Auxiliary [:]OUTPut[<channel>]:AUXiliary<A|B>:SOURce
Line State
<aux_line_mnemonic>
Query state of Auxiliary [:]OUTPut[<channel>]:AUXiliary<A|B>:STATe?
Line
Table B.13Output State
Function
SCPI Command
Set Output State [:]OUTPut[<channel>][:STATe] <on-off-state>
Set Output State at [:]OUTPut[<channel>]:PON:STATe <on-off-state>
Power-On
Power-On Configuration [:]OUTPut[<channel>]:PON:RECall
{LAST|PRESet|USER<setting_location>|SEQ<sequence_numb
er>}
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description Query
Select if output is latched off or auto Yes
recovers in the case of an over temperature
condition
Query temperature protection tripped N/A
Select if output is latched off or auto Yes
recovers in the case of an AC Fail
Query AC protection circuit tripped N/A
Description Query
Configure the polarity of the auxiliary line Yes
Configure the auxiliary line Yes
Query the state of the auxiliary line N/A
Description Query
Enable/disable the power supply output. Yes
Selects the state of the output at power-on Yes
Configure the supply to recall last setting, Yes
one of the user settings, factory preset
values or to enable an auto sequence.