Xantrex XDC 10-600 Operating Manual page 12

About This Manual
Who Should Use This Manual
This manual is designed for users who understand basic electrical theory, especially
as applied to the operation of power supplies. This implies a recognition of constant
voltage and constant current operating modes and the control of input and output
power, as well as the observance of safe techniques while making connections to the
supply and any changes in settings.
Navigation
To help you locate information easily, this manual has the following:
•
A Table of Contents
•
A List of Figures
•
A List of Tables
•
An Index
Sections
Section 1: About the XDC Power Supply describes the power supply features,
front panel controls, front panel display, and rear panel connectors. It also gives an
overview of operation.
Section 2: Installation describes how to mount the power supply, how to
connect it, and how to run initial self-tests.
Section 3: Operation
the front panel using the function keys and menu options.
Section 4: Remote Operation
how to send commands to the power supply through the SCPI programming
language.
Section 5: Current Sharing (6000 Watt only)
power supply for current sharing among units connected in parallel.
Appendix A: Calibration
Release 3.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
describes basic operation and functions carried out from
explains how to hook up remote interfaces and
describes calibration parameters and procedures.
explains how to configure the
ix