Power Supply Settings - Xantrex RS232-XPD Operating Manual

Power Supply Settings

Release 1.2
For serial communication, the computer and the RS-232 interface must share the
same communication settings. Make sure that the settings of the computer and of
the power supply agree with those shown in Table 2.11.
Table 2.11 Power Supply Settings
Parameter
Transmission
Mode
Speeds
Parity
Connector
Start Bit
Stop Bit
Data Bits
Protocols
Installation and Configuration
Setting
Asynchronous
Full Duplex
75, 150, 300, 600, 1200, 2400, 4800, 9600
None
DB9-pin Male
1
1
8
XON/XOFF
CTS/RTS (DSR/DTR)
NONE
Power Supply Settings
27