Table 4.2 Analog Programming Pins; Figure 4.2 Schematic For User Line Interface - Xantrex XDC 10-600 Operating Manual

CHASSIS POTENTIAL

Figure 4.2 Schematic For User Line Interface

Table 4.2 Analog Programming Pins

Pin #
B1
B2
B3
B4
B5
B6
The analog setpoint and readback pins may be configured to work in either a 0–5V
range or 0–10V range.
The programming lines have their own isolated power source (10mA max), and this
power can be looped back to power the user lines, if required. Connect the pins as
shown in Table 4.3.
Release 3.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CNY17-2
CNY17-2
CNY17-2
CNY17-2
Function
Analog Programming (GND)
12V (unregulated) 10mA max
Voltage Setpoint (0–5/10V)
Current Setpoint (0–5/10V)
Voltage Readback (0–5/10V)
Current Readback (0–5/10V)
Remote Analog Operation
ISOLATED USER LINES
508 Ohm
0.4W
508 Ohm
0.4W
Vf = 1.3V TYP, 1.5V MAX
If = 10mA Recommended, 90mA MAX
Input/Output
Output
Output
Input
Input
Output
Output
Remote Operation
USER LINES
109