Table B.1 Ieee 488.2 Commands - Xantrex XDC 10-600 Operating Manual

Table B.1IEEE 488.2 Commands
SCPI Command
Function
Clear Status *CLS
[:]STATus[<channel>]:CLEAr
Standard Event Status *ESE?
Enable Query [:]STATus[<channel>]:STANdard:ENABle
Standard Event Status *ESE
Enable [:]STATus[<channel>]:STANdard:ENABle <ESE-word>
Standard Event Status *ESR?
Register Query [:]STATus[<channel>]:STANDard[:EVENt]?
Identification Query *IDN?
[:]SYSTem[<channel>]:IDENtify?
Individual Status Query *IST?
Operation Complete *OPC
Command
Query Opertion Complete *OPC?
Command
Option Identification *OPT?
Query [:]SYSTem[<channel>]:OPTIon
Parallel Poll Enable *PRE?
Register Query
Parallel Poll Enable *PRE <status-enable>
Register Command
Query Power On Status *PSC?
Clear [:]STATus[<channel>]:POSClear?
Power-On Status Clear *PSC
[:]STATus[<channel>]:POSClear <on-off-state>
Recall *RCL
[:]SYSTem[<channel>]=RECall <setting_location>
Reset *RST
[:]SYSTem[<channel>]:RESet
Save User Settings *SAV
[:]SYSTem[<channel>]:SAVE[USER] <setting_location>
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description Query
Clears the status data structures. N/A
Query the Standard Event Status Enable N/A
register settings.
Set the Standard Event Status Enable N/A
Restier bits.
Query Standard Event Status Register. N/A
Query identification string. (Manufacturer's N/A
information.)
Reads the current state of the IEEE 488.1 N/A
defined "ist" local message in the device
Causes the device to generate the operation N/A
complete message in the Standard Event
Status register when all pending delected
device operations have finished
Place and ASCII character "1" into the N/A
output queue when all pending operations
have been finished. See IEEE 488.2-1992
section 12.5.3.
Identify reportable device options N/A
Query the Parallel Poll Enable Register N/A
setting
Sets the Parallel Poll Enable Register bits. N/A
See IEEE 488.2 section 11.6 for details.
Query Power-On Status Clear setting N/A
Controls the automatic power-on clearing of N/A
the Service Requect Enable Register,
Standard Event Status Enable Register,
Parallel Poll Enable Register and other
Possible
event enable registers. values are
0 (leave them alone) or 1 (clear them).
Restores the settings of unit from values N/A
stored in memory.
Performs a device reset. Set the power N/A
supply to a known state that is independent
of the use history of the device.
Stores the current setting of the device in N/A
local memory. Scope is same as *RST