Xantrex XDC 10-600 Operating Manual page 92

Step # Do This
14
15
Setting step advance by time:
This procedure is continued from step 13 in the "To program a sequence:" table. It
describes how to program the sequence to advance a particular step by waiting for a
certain time period.
Step # Do This
1
2
The completion of this procedure will bring you back to step 15 of the "To program
a sequence:" table. Continue programming the current step.
Release 3.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Set the step advance method.
To go to the next step in
ENTER
the sequence. This will
return you to step 7 in
this table. Repeat steps 7 to 14 for
all remaining steps in the sequence.
Press to exit auto
EXIT
sequence programming
and return to the default
screen.
Enter the Step duration.
ENTER
The format of the display
is hh:mm:ss.ss.
Use the decimal key to move to
the right.
ENTER
Power Supply Operation
You Will See
To Next Step
Step 2
You Will See
Set Step Time
T=##:##:##.##
To Next Step
Operation
89