Table 4.13 Remote Control Sub-Register; Table 4.14 Current Share Sub-Register - Xantrex XDC 10-600 Operating Manual

Remote Operation
SCPI Commands for Digital Interfaces

Table 4.13 Remote CONtrol Sub-Register

Bit
0
1
2
3
4
5
6
7
Current SHare Sub-Register
This register shows the state of the current share configuration, which can either be
set through the front panel Current Share Config menu, or through the SCPI
command SOURce:COMBine:CSHare:MODE.

Table 4.14 Current SHare Sub-Register

Bit
0
1
148
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Bit Weight Bit Name
1 Analog
Control
Voltage
2 Analog
Control
Current
4 GPIB
CONtrol
8 GPIB
CONtrol
with LLO
16 RS-232
CONtrol
32 RS-232
Control with
LLO
64 Multi-chann
el CONtrol
128 Multi-chann
el Control
with LLO
Bit Weight Bit Name
1 MASTer
2 SLAVe
Description
The Voltage Setpoint is under control of the
Analog Programming Interface.
The Current Setpoint is under control of the
Analog Programming interface.
The power supply is under Remote CONtrol via
the GPIB interface.
The power supply is under Remote Control via
the GPIB interface, with local controls locked out.
The power supply is under Remote CONtrol via
the RS-232 interface.
The power supply is under Remote CONtTrol via
the RS-232 interface, with local controls locked
out.
The power supply is under Remote CONtrol via
the Multi-channel Programming interface.
The power supply is under Remote CONtrol via
the Multi-channel Programming interface, with
local controls locked out.
Description
The power supply is configured to be a Current
Share Master.
The power supply is configured to be a Current
Share Slave.
Operating Manual for XDC Series Power Supply