Xantrex XDC 10-600 Operating Manual page 71

Operation
Power Supply Operation
These 2 extra steps are shown in the following example.
To set the Under-Voltage Protection:
Step # Do This
1
2
3
4
5
6
7
To set the Over-Current Protection:
Step # Do This
1
2
3
4
5
6
7
68
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PROT SET
ALARMS
Press repeatedly until the
PROT SET
ALARMS
desired setting appears.
ENTER
Use the Voltage knob, the numeric
keypad, or the arrow keys to enter a
value (0–103% of the unit's rated
voltage).
ENTER
Use the arrow keys to select Yes or
No. For this example, Yes is selected.
ENTER
PROT SET
ALARMS
Press repeatedly until the
PROT SET
ALARMS
desired setting appears.
ENTER
Use the Current knob, the numeric
keypad, or the arrow keys to enter a
value (0–103% of the unit's rated
current).
ENTER
Use the arrow keys to select Yes or
No. For this example, Yes is selected.
ENTER
You Will See
OVP SET 0V
UVP SET 0V
UVP SET 0V
UVP SET ####V
S/D if trip? N
S/D if trip? Y
This setting is saved and the display
returns to its default operating mode.
You Will See
OVP SET 0V
OCP SET 0A
OCP SET 0A
OCP SET ####A
S/D if trip? N
S/D if trip? Y
This setting is saved and the display
returns to its default operating mode.
Operating Manual for XDC Series Power Supply