To set Fold Protection:
Step # Do This
1
2
3
4
5
6
7
Set
The Shutdown Recovery menu offers 2 options for AC Off (ACO) and
Shutdown
Over-Temperature protection (OTP):
Recovery for
•
Auto-Recovery: With this method, the power supply returns to its normal
AC Off and
operating state once the alarm condition no longer exists. For example, if there
OTP
was an over-temperature alarm and the protection was set to auto-recovery, the
power supply would return to its normal operating state once the temperature
was reduced below the alarm level.
•
Latched: With this method, the power supply remains in Shutdown state until
the operator manually clears the protection level and manually turns the output
back on.
You can set either or both the OTP and AC Off to Auto-Recovery or Latched.
Release 3.0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PROT SET
ALARMS
Press repeatedly.
PROT SET
ALARMS
ENTER
Use the arrow keys or the numeric
keypad to select the value: None, CC,
CV, CP
ENTER
Use the arrow keys or the numeric
keypad to select the delay time.
ENTER
Power Supply Operation
You Will See
OVP SET 0V
Fold SD Mode
Fold on ####
Delay 0s
This setting is saved.
Operation
71