Xantrex XDC 10-600 Operating Manual page 89

Operation
Power Supply Operation
User Setting
User Setting lets you restore a custom setting the next time the unit is powered on.
This assumes at least one user setting has been stored in memory. See "Store User
Settings" on page 77.
To select User Setting:
Step # Do This
1
2
3
4
5
6
7
1. You can also press the Down arrow 2 times.
Last Setting
Selecting Last Setting lets you restore the settings that are in use when the power
supply is powered off, the next time it is powered on.
To select Last Setting:
Step # Do This
1
2
3
4
5
1. You can also press the Down arrow 2 times.
86
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MENU
1
2 times .
MENU
ENTER
MENU
Enter a value from 1 to 10. User Set ##
ENTER
or to scroll,
to select.
ENTER
to select, or
ENTER
and to change.
ENTER
MENU
1
2 times .
MENU
ENTER
ENTER
to select, or
ENTER
and to change.
ENTER
You Will See
ERROR MSGS
PON CONFIG
Last Setting
User Settings
Out ON? Y
The default display for the selected
operating mode.
You Will See
ERROR MSGS
PON CONFIG
Last Setting
Out ON? Y
The default display for the selected
operating mode.
Operating Manual for XDC Series Power Supply